Free tool: two builds only
Board counter
Pick a build and a size, and see how many boards to buy. It works for two things only: our chicken run and our raised garden bed.
Chicken run: boards to buy at ten sizes
| Size typed | 2x4 boards | 2x2 boards |
|---|---|---|
| 48 x 36 x 40 in | 12 | 2 |
| 72 x 48 x 40 in | 17 | 2 |
| 96 x 48 x 40 in | 17 | 2 |
| 120 x 60 x 40 in | 19 | 2 |
| 144 x 72 x 40 in | 27 | 2 |
| 189 x 94 1/2 x 47 in | 27 | 2 |
| 1200 x 900 x 1000 mm | 11 | 2 |
| 2400 x 1200 x 1000 mm | 17 | 2 |
| 3600 x 1800 x 1000 mm | 27 | 2 |
| 4800 x 2400 x 1200 mm | 27 | 2 |
Raised garden bed: boards to buy at nine sizes
| Size typed | 2x6 boards | 4x4 posts |
|---|---|---|
| 48 x 24 in, 2 high | 6 | 1 |
| 72 x 36 in, 2 high | 8 | 2 |
| 96 x 36 in, 2 high | 8 | 2 |
| 96 x 48 in, 2 high | 9 | 2 |
| 96 x 48 in, 3 high | 12 | 2 |
| 1200 x 600 mm, 2 high | 5 | 1 |
| 1800 x 900 mm, 2 high | 8 | 2 |
| 2400 x 1200 mm, 2 high | 9 | 2 |
| 2400 x 1200 mm, 3 high | 12 | 2 |
Chicken run sizes are length x width x height. Raised bed sizes are length x width, then the number of boards stacked. Boards and posts are 96 in long in the inch rows and 2440 mm long in the millimetre rows.
Read from each kit's own spreadsheet after LibreOffice recalculated it at each size. With JavaScript on, this box becomes a size picker.
What it counts
Whole boards to buy, for the size you pick. The count allows for the saw kerf and assumes boards 96 in long in inch mode, or 2440 mm long in millimetre mode.
The numbers are not worked out in your browser. Each one was read from the spreadsheet we sell for that build, after LibreOffice recalculated it at that size: 2,200 sizes of the chicken run and 508 of the raised garden bed.
It is free. There is nothing to sign up for and nothing to download.
Only these two builds
If you were looking for a cut list calculator, know what this is first. It counts boards for two set builds at set stops. You cannot enter your own parts, your own board length or a size between two stops.
The spreadsheet in each kit is the full calculator for its build. It takes any size in its range and the board length your yard sells. It gives the cut list with the length of every part, a cutting plan board by board, and the timber cost at the prices you type.
-
Chicken Run kit
A reach-in mesh run on a 2x4 frame. 48 to 189 in long, 36 to 94 1/2 in wide, 24 to 47 in high.
$12.90USD
-
Raised Garden Bed kit
Stacked 2x6 boards screwed to 4x4 corner posts. 36 in to 96 in long, 24 in to 48 in wide, one to four boards high.
This kit has no page on this site yet. It is sold in our Etsy shop.
What stays fixed
Only the sizes on the sliders move. Every other input is left at the value each spreadsheet starts with.
- Chicken run: a 24 in door, one mid post on each long side, a mesh top, a pop-hole, a 12 in mesh apron on the ground and a 0.125 in saw kerf. In millimetre mode: 600 mm, 300 mm and 3 mm.
- Raised garden bed: a cap rail on top with no overhang, posts that go 6 in into the ground and a 0.125 in saw kerf. In millimetre mode: 150 mm and 3 mm.
Inches and millimetres are two separate sets of answers, not one set converted, because each spreadsheet starts from different values in each system.
What it does not tell you
- The cut list. This page gives the number of parts, not their lengths.
- Hardware. The kits count the screws and, for the chicken run, the staples, pegs, ground anchors, hinges and latch. This page leaves them out.
- The fewest boards possible. Each spreadsheet's cutting plan is a good plan. It is not proven to be the smallest.
- Anything about strength. Neither plan gives a load, weight or strength rating. The chicken run's limits are on the Chicken Run page. The raised garden bed's own wording follows.
Raised Garden Bed: the plan's own safety note
This is a plan for a garden planter. It makes no load, weight, soil-pressure or strength rating of any kind. Never stand, sit, lean or climb on the boards, posts or cap (the cap rail is a trim, not a seat or a step), and assemble the bed where it will stay. Choose timber and any finish that suit what you plan to grow. Check every part against the cut list before assembly.
How the numbers were checked
Two other programs worked out every size again without a spreadsheet: 2,708 sizes in all. All three agreed on every figure this page shows. The test each kit's file goes through is described in How we check every kit.