Chicken Run kit: the spreadsheet's own numbers
Try your size
Set a length, a width and a height. The answer is what the Chicken Run kit's spreadsheet gave when that size was typed into it.
The Chicken Run spreadsheet at ten sizes
| Size typed | 2x4 | 2x2 | Mesh |
|---|---|---|---|
| 48 x 36 x 40 in | 12 | 2 | 76.8 sq ft |
| 72 x 48 x 40 in | 17 | 2 | 115.5 sq ft |
| 96 x 48 x 40 in * | 17 | 2 | 141.4 sq ft |
| 120 x 60 x 40 in | 19 | 2 | 186.1 sq ft |
| 144 x 72 x 40 in | 27 | 2 | 234.9 sq ft |
| 189 x 94 1/2 x 47 in | 27 | 2 | 364.6 sq ft |
| 1200 x 900 x 1000 mm | 11 | 2 | 6.91 m² |
| 2400 x 1200 x 1000 mm * | 17 | 2 | 12.72 m² |
| 3600 x 1800 x 1000 mm | 27 | 2 | 21.14 m² |
| 4800 x 2400 x 1200 mm | 27 | 2 | 33.87 m² |
Sizes are length x width x height. 2x4 and 2x2 are boards to buy, each 96 in long in the inch rows and 2440 mm long in the millimetre rows. * marks the size the spreadsheet starts at. Each of these sizes has 39 pieces to cut.
Read from the kit's own spreadsheet after LibreOffice recalculated it at each size. With JavaScript on, this box becomes a size picker over 2,200 sizes.
What this page is
These numbers come from the kit's own spreadsheet. Each size was typed into the file that is on sale, LibreOffice recalculated it, and the answers were read back. That was done at 2,200 sizes: 1,100 in inches and 1,100 in millimetres.
The kit itself is not held to these stops. It accepts any length from 48 to 189 in, any width from 36 to 94 1/2 in and any height from 24 to 47 in. It also gives what this page leaves out: how long every part is, which board each part is cut from, how many screws, staples, pegs and anchors to buy, and the timber cost at the prices you type.
Chicken Run Cut-List Kit
$12.90USD Buy on Etsy (opens in a new tab)Digital download: nothing is shipped. Opens our Etsy listing in a new tab. You pay on Etsy and Etsy delivers the files. This site takes no payment.
See what is in the kit, the sizes it accepts and what it does not work out.
What stays fixed here
Only length, width and height move on this page. Every other input is left at the value the spreadsheet starts with. In the kit you can change each of them.
| Input | Inches | mm |
|---|---|---|
| Door opening width | 24 in | 600 mm |
| Mid posts on each long side | 1 | 1 |
| Top cover (1 is a mesh top) | 1 | 1 |
| Pop-hole to meet a coop (1 is yes) | 1 | 1 |
| Pop-hole width | 12 in | 300 mm |
| Pop-hole height | 16 in | 400 mm |
| Mesh apron on the ground | 12 in | 300 mm |
| Saw kerf | 0.125 in | 3 mm |
| Length of each 2x4 board | 96 in | 2440 mm |
| Length of each 2x2 board | 96 in | 2440 mm |
The board count depends on the board length, so a yard that sells longer boards changes the answer. The kit has a cell for it.
Inches and millimetres are two separate sets of answers, not one set converted. In millimetre mode the spreadsheet starts from its metric values. A run typed as 48 x 36 x 40 in needs 12 2x4 boards. Typed as 1200 x 900 x 1000 mm, a little smaller, it needs 11.
Why the count does not rise evenly
Boards are bought whole, and each part is cut from one board. So a longer run can need the same number of boards, and a small change can add several.
- 72 x 48 x 40 in and 96 x 48 x 40 in both need 17 2x4 boards.
- 120 x 60 x 40 in needs 19. 144 x 72 x 40 in needs 27.
The spreadsheet's cutting plan is a good plan. It is not proven to use the fewest boards possible.
What the numbers leave out
- Mesh is a plain area with no allowance for laps. The plan does not choose the gauge or the opening size.
- Screws, staples, pegs, ground anchors, hinges and the latch are counted in the kit. They are not shown here.
- Nothing here rates the run for strength, wind, predators or the number of birds it suits. The plan's own limits are printed in full on the Chicken Run page.
How the numbers were checked
After LibreOffice had answered, two other programs worked out every one of the 2,200 sizes again without a spreadsheet. All three agreed on every figure this page shows.
That check is for this page. The test each kit's file goes through is described in How we check every kit.